1-800-265-4864

Contact Us or Call 1-800-265-4864 for More Info, to Place an Order ($35 minimum), or to Find out Shipping Costs.
No Arizona Sales Tax for items shipped outside AZ!
Next Day, 2nd Day, and Ground Shipped the Same Day!

COD

Home Page	New Products	International Customers	Contact Info
Free Catalog	Products on Sale	New to the Internet?	Search Page

Use your mouse to Click on the blue buttons above or below

Example: Click on "New Products" or "Complete Product Lists"

Some Web Pages are Long. You will need to Scroll down the Page

New Fast Floor Masking Machine

Complete Product Lists	Drywall Benches	Drywall Sanding	Drywall Texture Tools
Automatic Taping Tools	Drywall Hanging Tools	Drywall Stilts	Hand Taping Tools
Auto Taping Tool Parts	Drywall Power Tools	Drywall Tapes	Screws & Fasteners

TapeTech Angle Applicators or Corner Boxes

Related Tape Tech Pages or Similar TapeTech Pages: (Click below)

Click Here For Tape Tech Angle Applicators Parts Diagram & Price List

Corner Box General Information and Maintenance

The Corner Applicator works in conjunction with the 2", 3", or the 3" adjustable Corner Finisher. This tool allows the operator to put a consistent finish coat to both sides of an angle at one time.

The Corner Finisher is attached to the Corner Applicator by inserting the cone/ball end of the applicator into the insert socket of the Corner Finisher.

The Corner Applicator is filled by using the EasyClean® pump with the box filler adapter. To fill the Corner Applicator, turn it on its side and insert the filler nozzle of the applicator into the box adapter (without the slot adapter) of the pump. The Corner Finisher should be over the edge of the joint compound bucket. Pump the Corner Applicator until it is full.

The Corner Applicator is a pressure controlled tool. Therefore, for best results, even pressure should be applied. Hold the applicator with both hands, one near the end of the handle and the other close to the applicator. When the Corner Finisher is set in the angle, all blades should be flush with the sides of the angle. The cone/ball of the Corner Applicator should be kept straight in the insert socket of the Corner Finisher and centered in the angle being finished (no tilt to either side).

To finish vertical angles, set the Corner Finisher near the bottom of the vertical angle with the blade end closest to the floor. Apply pressure, with the handle, to the applicator pressure plate and pull up about 2' to 3' and sweep the Corner Finisher away from the angle. Turn the Corner Applicator around and set the Corner Finisher in the top of the angle, pull down through the bottom mud mark and sweep it away from the angle.

Operation

For horizontal angles, set the Corner Finisher in one corner of the angle, apply pressure to the applicator and pull it to the opposite corner. Near the end of the opposite corner, sweep the corner finisher away from the angle. Turn the Corner Applicator around, set it in the opposite corner, apply pressure and pull the corner finisher back through the mud mark and sweep the Corner Applicator away from the angle.

For the easiest operation, keep the handle at a 45 degree angle, keep the Corner Finisher set flush in the angle, and keep the outlet cone straight in the Corner Finisher.

Maintenance

Clean thoroughly with a brush and water (or a water hose) to remove all joint compound from the tool. Pay close attention to insure that the filler nozzle is completely cleaned of all joint compound. Then, after the tool is clean, lightly oil with Ames® Bazooka® Oil or any light machine oil.

Send email to webmaster@fantastictools.com with questions or comments about this website

Last Modified: Tuesday October 09, 2007