1-800-265-4864

Contact Us or Call 1-800-265-4864 for More Info, to Place an Order ($35 minimum), or to Find out Shipping Costs.
No Arizona Sales Tax for items shipped outside AZ!
Next Day, 2nd Day, and Ground Shipped the Same Day!

COD

Home Page	New Products	International Customers	Contact Info
Free Catalog	Products on Sale	New to the Internet?	Search Page

Use your mouse to Click on the blue buttons above or below

Example: Click on "New Products" or "Complete Product Lists"

Some Web Pages are Long. You will need to Scroll down the Page

New Fast Floor Masking Machine

Complete Product Lists	Drywall Benches	Drywall Sanding	Drywall Texture Tools
Automatic Taping Tools	Drywall Hanging Tools	Drywall Stilts	Hand Taping Tools
Auto Taping Tool Parts	Drywall Power Tools	Drywall Tapes	Screws & Fasteners

TapeTech Easy Clean Nail Spotters

Related Tape Tech Pages or Similar TapeTech Pages: (Click below)

Click Here For Tape Tech Nail Spotter Parts Diagram & Price List

Nail Spotter General Information and Maintenance

Available in 2" and 3" widths, the nail spotter and the EasyClean Nail Spotter fills nail and screw head depressions with joint compound. Each row of dimples can be filled in one pass with a nail spotter. Walls and ceilings may be done while working from the floor.

Use the pump with the box and slot adapter to fill the nail spotter, making sure the joint compound is well mixed and lump free. Normally, no water needs to be added to thin the compound mixture.

Make positive contact with the wallboard surface at the beginning of the row. Draw the tool smoothly along the entire row, applying moderate pressure to force the compound onto the wallboard surface. The nail spotter blade skims off excess compound and leaves a slight crown directly over each dimple as the tool floats along the rocking skid. After passing over the last dimple, gradually break contact with the surface using a sweeping motion. This will give you properly filled dimples without leaving excess compound to be removed by hand.

Maintenance

Although the nail spotter blade is precision ground and specially hardened, it can be chipped by an exposed nail or screw head or become worn from use. To replace the blade, unscrew the thumb nuts on the top of the blade clamp, lift off the used blade and replace it. Be certain to press the blade firmly against the middle support while tightening the thumb nuts. The middle of the blade should be slightly lower than the ends to leave a slight center crown over the nail or screw.

Clean thoroughly, after every use, with a brush and water (or a water hose). With the specially designed EasyClean Nail Spotter, lift up the release on the back of the tool, pull the pressure plate open and wash. Pay close attention that all joint compound is removed. Complete the clean-up by lightly oiling all wear points Bazooka® Oil.

Send email to webmaster@fantastictools.com with questions or comments about this website

Last Modified: Tuesday October 09, 2007