1-800-265-4864

Contact Us or Call 1-800-265-4864 for More Info, to Place an Order ($35 minimum), or to Find out Shipping Costs.
No Arizona Sales Tax for items shipped outside AZ!
Next Day, 2nd Day, and Ground Shipped the Same Day!

COD

Home Page	New Products	International Customers	Contact Info
Free Catalog	Products on Sale	New to the Internet?	Search Page

Use your mouse to Click on the blue buttons above or below

Example: Click on "New Products" or "Complete Product Lists"

Some Web Pages are Long. You will need to Scroll down the Page

New Fast Floor Masking Machine

Complete Product Lists	Drywall Benches	Drywall Sanding	Drywall Texture Tools
Automatic Taping Tools	Drywall Hanging Tools	Drywall Stilts	Hand Taping Tools
Auto Taping Tool Parts	Drywall Power Tools	Drywall Tapes	Screws & Fasteners

TapeTech Easy Clean Pump

Related Tape Tech Pages or Similar TapeTech Pages: (Click below)

Click Here For Tape Tech Pump Parts Diagram & Price List

Pump General Information and Maintenance

With its two nozzles, the EasyClean® pump fills nail spotters, automatic tapers, flat boxes, and Corner Applicators.

Either the filler or the gooseneck adapter is attached to the pump by aligning the slots of the adapter over the studs on the pump housing and tightening the two hex nuts. The gasket should be placed between the pump and the adapter, before tightening nuts, to prevent leakage.

Place the EasyClean® loading pump in a standard five gallon pail, making sure the joint compound is well mixed and lump free. A new or fresh pump should be primed before use by pouring 1/2 cup of water into the outlet. Once the pump is full of joint compound, no further priming is needed.

Maintenance

The EasyClean® pump can be disassembled by disengaging the two clasps at the top of the pump and pulling the barrel away from the main pump body. The plunger can then be removed by disengaging the quick release pin and sliding the plunger through the pump housing.

The pump can now be cleaned by using a water hose or water and a brush to remove the joint compound from the pump housing and plunger. Then, after the tool is clean, lightly oil with Ames® Bazooka® Oil or any other light oil.

To keep your EasyClean® pump in top working order, you may need to replace the screen, gasket or o-ring on your pump. These items should be checked when you clean your pump.

Send email to webmaster@fantastictools.com with questions or comments about this website

Last Modified: Tuesday October 09, 2007